+447979485982
info@spectrophotometers.com
+447979485982
Generate Catalog For:

Mass Spectrometer GC-MS-QP-2010

Mass Spectrometer
GC-MS-QP-2010

www.spectrophotometers.com |  info@Spectrophotometers.net

Description:

Gas Chromatography and Mass spectrometry combines two powerful techniques to provide the identification of compounds with low detection limits and the potential for quantitative analysis
Liquid, gaseous and solid samples work well with GC-MS analysis. However, analyzed compounds are typically volatile and semi-volatile
In Gas Chromatography (GC), a sample is volatilized and carried by an inert gas through a coated glass capillary column. The “stationary phase” is bonded to the interior of the column. Retention time is how long that a compound takes a pass through the column to the detector. Finally, the sample is identified by comparing the sample with a reference
In the usual Mass spectrometry step of GC-MS, compounds leaving the GC column are fragmented by electron impact. The charged fragments are detected and the subsequent spectrum obtained can be used to identify the molecule Fragmentation patterns are reproducible and can be used to produce quantitative measurements.

GC-MS analysis of liquids, gases and solids
Gas Chromatography Mass Spectrometry analyses are performed on liquids, gases or solids. For liquids and gases, the sample is commonly directly injected the GC. For solids, the analysis is carried out by solvent extraction, outgassing(desorption) or pyrolysis

Specifications:
Column Oven
Column oven TemperatureRoom Temperature + 10 0C – 4000C
Temperature Stability± 0.030C
Maximum
heating rate40 0C/min
temperature400 0C
run time999.99 min
Temperature control 10-segment programmable temperature control
Flow rate and split ratio Electronic controlled pressure
Pressure range 0-999 kPa
Flow range 0-200 mL/min
Column DB-5MS 30m*0.25mm*0.25µ fused silica capillary column or similar column
Mass Spectrometer
Mass
range1.5 – 1024 amu
stabilityBetter than 0.1 amu/48h
ResolutionUnit Mass
Sensitivity
EI source, full scan: (range 100-300 amu)
1pg of N, S/N ≥ 100:1
Maximum scan rate10,000 amu/s
Dynamic range105
Ion Source
Electron impact ionization source (EI), standard
Chemical Ionization source(cl)(optional)
Dual FilamentsProgrammable switch
Maximum filament current3 A
Emission Current10 - 350µA adjustable
Ionization energy5 – 150 eV adjustable
Ion Source temperature150 – 3200C adjustable, individually controlled
Mass Analyser
Quadrupole
Full scan, selected ion monitoring (SIM) and acquisition
At most 128 groups in SIM mode
At most 128 ions in each group
Electron multiplier + high-energy dynode back focusing assembly
GC-MS interface Individually controlled through transmission cable, 150 – 3200C adjustable
Vacuum system Turbo molecular pump (250 L/s), mechanical (180 L/min)
Features:
  • Features:
    • High performance-to-price ratio, low maintenance, long term stable industry or lab use
    • Small, light and easy to carry
    • Electronic pressure/flow control system (EPC) on GC-MS improves baseline stability and sensitivity
    • The newly designed ion optics system optimizes ion yields and transmission characteristics, effectively improving the sensitivity and resolution, while reducing neutral particle noise
    • EI filaments provide high efficiency of electron emission pre-quad removes un desirable contamination before the main analytical quadrupole and decreases cleaning frequency
    • New chemical Ionization (CI) source expands range of applications
    • Sample Introduction system: New industrial design is simple and elegant, with a distinctive, user-friendly GC control panel, Interface was designed with protection from user error in mind
    • Simple and practical direct liquid and solid inlet probe option allows fast structural analysis of unknown compounds, providing a powerful tool for chemical synthesis applications
    • Unique removable probe heater is easy to replace in case of damage or contamination. The maximum temperature is 6500C
    • Compatible with standard conventional GC columns<
    • Optional auto sampler: Innovative liquid autosampler can rotate 3600C on the horizontal plane. The autosampler can be easily removed from the mount to simplify the GC maintenance
  • Powerful Software System
    • Users can easily reference all relevant information during the analysis
    • Instrument status parameters are displayed in real-time. Alarms are shown in noticeable colors. The automated low vacuum protection function protects fragile parts such as the filament, detector etc.
    • Modes: Scan, Selected Ion-Monitoring (SIM)
    • All analysis parameters can be controlled through software, including carrier gas flow, pressure, column oven temperature, inlet temperature etc
    • High level safety precautions- Auto power shut off
    • Analyzed methods can be easily exported and imported
Applications:

The excellent performance of the GC-MS makes it suitable for applications in various fields;

  • Food Safety and Fragrance
  • Environmental Safety
  • Beverages & Liquors
  • Agriculture and Pesticides
  • Research & Development labs
  • Pharmaceuticals
  • Biological
  • Geochemical Research
  • Forensic Applications

Spectrophotometers are widely used for colorimetric applications in various fields of biochemistry, physics and chemical industries. We carry wide array of products suitable for all the specific needs including clinical, laboratory or research and industrial market.

  • Contact Us
  •  82A James Carter Road, Mildenhall Industrial Estate, Suffolk IP28 7DE, United Kingdom
  •  +447979485982
  •  info@spectrophotometers.com

Map

Copyright ©2021 Spectrophotometers.com All Rights Reserved